Sama Electronic
The amplifier is a amplifier in the central antenna system that amplifies its received signals and provides the user with an output. The use of an amplifier in the central antenna to amplify the signal before doing the split. As long as the split action is performed, the signal weakened with the input signal in…
The splitter is one of the signal distribution equipment in the central antenna system, which has the role of dividing the flow, and is used to deliver signals to the receivers and to isolate each receiver. The splitter is a type of end device in the central antenna system and is used to bridge the…
The antenna is one of the main parts of the central antenna. Antenna branch or antenna is the most important type of air antenna found on the roof of many homes. Antenna is a telecommunication device that is tasked with converting electrical signals into electromagnetic waves in Transmitter mode and converting electromagnetic waves to electrical…
The modulator is a device for transmitting images in the central antenna system. In fact, the modulator is a DVR output converter to VHF and UHF, and allows the DVR to be connected to the central antenna. Some modulators have multiple outputs that allow the VGA or HDMI output to be connected to the central…
Connectors are parts that are commonly used to connect different sections of the central antenna. The carriers are split into two sets of rods and pins. The pivot pin is usually soldered and the nipple connector is placed in the dip connector. Most connectors in just one direction Dart connection. Inside the connectors, there is…
The receiver’s receptacle socket is to the central antenna to receive the appropriate signal from the receiver. The receiver’s receiver spots are of two types: Transmitter Transistor Transmitter: While providing the signal needed for a receiver, the signal is also transmitted to another receptacle. Split Split: End of the Last Outlet It is in the…
Coaxial cable, also referred to as “coaxial cable”, is one of the equipment used in the central antenna system. The cable has an internal conductor and is surrounded by soft insulation. This flexible layer is also provided by a thin conductor for flexibility. The wires are woven together. All of the components are placed inside…
Tap off is the name of a piece in the central antenna system, which is responsible for dividing the received signal from the antenna, with low signal loss on the main line and various dropouts assigned to the consumer. The node has a main input and a main output With a low drop in input…
